E-mail: info@chinasteady.com
Hot Line: +86-532-85176125
◎ Plastic Injection Molding Machine

Servo Motor Driven Injection Molding Machine

Servo Motor Driven Injection Molding Machine

Model Number: ST-200M8S Screw diameter: 53mm Screw L/D ratio: 20L/D Shot Volume:529cm3 Injection weight:495g Injection rate: 188.5cm3/s Plasticizing capacity:28.7g/s Injection pressure:157Mpa Screw speed: 170rpm Clamp tonnage: 2000KN Toggle stroke: 490mm Space between tie bars:...

    Model Number: ST-200M8S

    Screw diameter: 53mm

    Screw L/D ratio: 20L/D

    Shot Volume:529cm3

    Injection weight:495g

    Injection rate: 188.5cm3/s

    Plasticizing capacity:28.7g/s

    Injection pressure:157Mpa

    Screw speed: 170rpm

    Clamp tonnage: 2000KN

    Toggle stroke: 490mm

    Space between tie bars: 530*530mm

    Max.mold height: 550mm

    Min.mold height: 200mm

    Ejector stroke: 140mm

    Ejector tonnage: 67KN

    Max.pump pressure: 17.5Mpa

    Pump motor power: 18.5KW

    Heater powre:14.1KW

    Machine dimension: 5.4*1.32*2.1m

    Machine weight:6.8T

    HIGH PRECISION, HIGH RESPONSE

    M8-S servo motor and energy machine adopt fully digital closed loop control,and the pressure can accurate to 0.3 bar, with high precision and stable flow, especially under low flow rate. Adopt permanent magnet sychronous motor and motor drive with high response .From 0~maximum flow rate, it only needs 60ms, and from 0~maximum pressure needs about 100ms.

    LOW OIL TEMPERATURE

    Compared to fixed pump machine and variable displacement machine, the oil temperature of M8-S series machine is the lowest, cause there is no extra energy lost via the reief valve.That  will prolong the using times of hydraulic oil and lessen wear, at the same time, saving cooling water.

    LONG LIFE AND LOW NOISE

    Adopt internal gear pump improted from Germany and have advantages of small leakage, stale and precise,long service life and low noise. Compared with fixed pump machine, the average noise of M8-S can be reduced down 20dB.

    Packaging & Shipping

    Steel pellete case fit for transportation shipping by 20ft or 40ft container


    Hot Tags: China servo motor driven injection molding machine suppliers, servo motor driven injection molding machine manufacturers, servo motor driven injection molding machine factory, servo motor driven injection molding machine company, buy, cheap, low price
    Copyright © Qingdao Steady Machinery Co.,Ltd All rights reserved.

    Qingdao Steady Machinery Co.,Ltd